Had a couple nice days and decided to see about the teak pads that the helmsman uses in the aft part of the cockpit. Wasn't sure if I would have to reef all the caulking out of them or not. Used the handy dandy Fein with the knife attachment and shaved the caulk down. All three areas needed touching up with fresh caulk. Did that and replaced some bungs. Sanded the hell out of the teak to get it uniform and all the mold and fungus out of it. Cleaned it with TeakGuard cleaner and then did the first coat of TeakGuard protectant. I think it turned out great. Needs 8 more coats. High traffic area back there.